D&R Axum version 3.0

Axum with 12 Faders + CRM section in Dropthrough, 1x Mic AD, 2x Line AD, 1x Line DA, 1x CRM, 1x DSsrc, 1x Hybrid

Rack ONE has space for 8 more I/O cards, 4x breakout panels are included.

Digital Modular Network based Broadcast Console.

The Axum is D&R's latest addition to a growing series of broadcast consoles. Its completely modular design in control surfaces and I/O rack makes it the logical choice for standardization in a broadcast environment.

The Axum can be used for small local 4 fader desktop use as well as large scale (128 faders max) production work and everything in between.

This example configuration of the AXUM digital mixing console has a control surface of 12 Motorfaders and a CRM/Studio section, ready to be used.

The I/O rack ONE is loaded with the following cards:

1x Axum Rack Engine
1x Axum Power Supply
1x Axum DSP processor for 32 stereo channels
1x Mic AD (4xMic input and 8x GPIO
2x Line AD (8x mono or 4 stereo line inputs and 8x GPIO)
1x Line D/A (8x mono or 4x stereo, 8x GPIO)
1x D/D card with sample rate converter (4xAES3 out/in and 8x GPIO)
1x CRM D/A Card (2xstereo, 2x Headphone and 8x GPIO)
8x Blind frontpanels for more I/O cards
4x Break out panels

The AXUM VERSION 3.0 is a modular completely preprogrammed platform that can grow with you and your organization any time, any moment.
 
I/O cards can be shared between systems and a Broadcast station that has decided to use the AXUM as their main and support mixers can be sure to have invested in a future proof product.
The Axum can be used for small local 4 fader desktop use as well as large scale (128 faders max) production work and everything in between.
 
A large matrix of 1280x1280 with extensive signal processing on a maximum of 128 stereo channels is available that can be assigned to Sixteen stereo summing mixing busses and sixteen monitor buses as well as directly between the maximum of 4 DSP's.

Imagine a console where you can decide yourself what a switch/encoder or fader will do for you. Not possible?
With the AXUM this is possible and... you can do that yourself by selecting a function out of hundreds of functions simply selectable from a database in your AXUM browser.
Two control surfaces (with their own CRM sections) in different studios sharing the same I/O rack is also no problem for the AXUM platform.
Hardware purchasing choices are straightforward:
Rack ONE accepts a maximum of 21 I/O single slot cards. Rack TWO accepts a maximum of 37 I/O single slot cards.
A Control Surface Frame starts with 4 faders as a minimum and can be extended to a maximum of 128 motorized faders plus Control/CRM section.
Each individual Control Surface Frame can be mounted drop through in a work surface left or right of your script space.

Interfacing with studio equipment is with high quality low cost readily available STP cable, also called shielded STP Ethernet cable, see breakout boxes below to choose from.
An internally generated webpage allows you to remotely control all settings from anywhere in the world over Ethernet and /or Internet.
The MambaNet protocol controls the communication between all system parts linked to each other with world standard Ethernet.
It gives such an enormous freedom in system solutions so we hardly can imagine that your needs can not be met with the AXUM.
A software Meter application is included and runs directly from the Control Surface, but also from any PC in the network.
Also hardware meters can be connected in the network anywhere, thanks to the MambaNet protocol.

HIGHLIGHTS

• 4 to 128 motorized Alps faders
• Faders can be used for channel faders and buss master faders
• Scalable On-Air/Production Console
• Separated control surfaces and I/O racks
• Control surfaces connected by Ethernet.
• Internal website for console setup. (already pre-programmed in the factory)
• I/O matrix of 1280 x 1280
• 16 stereo summing buses (Prog, Sub, Cue, Comm, 12x Aux) and 4 stereo monitoring buses
• 16 Talk back buses
• 4 stereo monitor buses per DSP card
• Inputs can directly assigned to the outputs
• 128 Stereo DSP channels max (4 DSP Cards inserted)
• Digital gain control
• 6 band comprehensive EQ
• Enhanced Voice Processing built in
• Processing presets
• Module presets
• Console presets
• Direct outputs available
• Converters are 24bit / 96kHz
• Cobra Net option
• Assignable channel meters in version 3.0
• Pop up Equalizer graphics per channel
• On-Air indication on screen
• Phone indication on screen
• Phase meters on modules, buses, monitor
• High precision Broadcast Clock
• Redundant power supply optional for both Control Surface and I/O rack
• Optional Remote Control Surface application