AEV Synapse broadcast mixing console (modular)

The AEV Synapse is a modular console designed to meet the needs of today's radio stations, offers a wide range of configurations based on a mainframe with 16 slots for input modules . This model in a standard configuration of Main frame  with16 inputs, meterbridge, master & Power supply, input configuration: (5 mic/lin; 3 lin/lin; 1 dig IN, 1 dig OUT, 1 Tel Hybrid, GPIO)

General overview:

-All Balanced inputs and outputs
-Modular 16 channel Mixer
-Input modules: Mic-Line, Line-Line, Digital digital and telephone hybrid
- A/B input control
-100 mm Sliders with Digital VCA control.
-Mic Input with insert I/O and Phantom Supply
-GPIs and GPOs (optional)
-Digital input (option) with automatic sample rate converter (32, 44.1, 48, 96 KHz)
-Three band tone module to control each analog input module (option)
-Double Harware interface: consumer optical and professional balanced
-Telephone opto-coupled hybrid with Digital Echo-canceller plug
-Meeting function on telephone hybrid
-2 independent bus (PGM, UTL) stereo outputs
-2 independent Analog Stereo Outputs (PGM and UTL)
-2 Independent Digital 32, 44.1, 48, 96 KHz output with selectable sample rate (PGM and UTL).
-Double Hardware interface: consumer optical and professional balanced
-CUE Bus
-Control Room and Studio modules with monitor mode selector
-Control Room and Studio out with mute logic
-DIM functions on headphones and Control Room
-2 Analog stereo VU meters: PGM (fix) and automatic CUE metering (switched)
-Integrate talk back microphone
-Built-in CUE speaker
-2 stereo inputs for external sources (AUX)
-Integrated "Control Studio Fader" controls
-Output opto-coupled ON AIR command
-Totally shielded bus
-Golden contact DB connectors for audio and logic I/O

Please note, that below prices are list prices in Euro and the console will be configured as per your needs and requirements - please feel free to contacty us for assistance and special offers!
Mainframe up to 16 input mod, including master mod. and power supply 2.200,00?
Micro/line input module (ALPS slider on digital VCA). 380,00?
Micro/line input module + equalizer 450,00?
Double line input module (ALPS VCA digital slider) 320,00?
Double Line input module + equalizer 390,00?
Dual digital input module (ALPS slider on digital VCA ). 400,00?
Dual Digital input + equalizer. 460,00?
Telephone Hybrid (by adding a plug echo canceller) 380,00?
Telephone Hybrid + equalizer. 450,00?
plug Digital echo canceller 65,00?
Equalizer Control module 300,00?
Dual digital output module. 300,00?
Dual Digital output + Equalizer control 480,00?
cover one slot input 30,00?
Option for external START/STOP comand. Ext.Start/Stop 29,00?
Remote Fader with 5 mt. Cable 350,00?


Specifications

MIC INPUT:
Input configuration: Transformer Balanced
Input Impedance: 200 ?
Sensitivity Level Range: Adjustable from -70 ÷-40 dBu (Trimmer adj.)
Input Level Range: ±12 dBu (Digital adj. step 0,5 dB)
Maximum Input Level: - 30 dBu
Phantom Supply: 42 Vdc selectable, with 3k3 c.c. protection
100 mm Fader control: VCA Digital controlled

INSERT SECTION:
Insert Output configuration: Unbalanced
Insert Output impedance: 100 ?
Insert Output level: 0 dBu
Insert Input configuration: Unbalanced
Insert Input impedance: 10 K?
Insert Input level: 0 dBu

DJ CONTROLS:
External DJ Slider control: Available
DJ Talk back : Available
In Start / Stop /Cough control: Available
Out Start / Stop Control : Available
Connector: D-Sub 15 Pole Female

LINE INPUTS:
Input configuration: Electronically balanced
Input Impedance: 10 K? (600 ? wired selectable)
Input Level Range: ±12 dBu (Digital adj. step 0,5 dB)
Headroom: + 18 dBu
100 mm Fader control: VCA Digital controlled
Connector: DSUB 15 pole female

DIGITAL CONTROLS:
In Start / Stop : Available
Out Start / Stop Control : Available

DIGITAL INPUT:
Input configuration: AES/EBU, IEC958,S/PDIF & EIAJ CP340/1201
Sample Rate: Automatic 32, 44.1, 48, 96 KHz converter
100 mm Fader control: VCA Digital controlled
Connector: DSUB 9 pole female, Optical
TELEPHONE HYBRID MODULE:
Input configuration : Opto-coupled
Input impedance: 600 ? Bal
Line Compensation: Automatically (max 5 Km)
Echo canceller Digital: (optional)
Tx Level: 0 or + 3 dBu dip switch selectable
Rx Level Range: ±12 dBu (Digital adj. step 0,5 dB)
Frequency response: 300 Hz ÷ 3400 Hz (-2 dB) without Echocanc
300 Hz ÷ 3400 Hz (-1.5 dB) with Echocanc
Distortion: < 1.5 %
Noise: -60 dB
Cross-talk: Digitally cancelled

DIGITAL CONTROLS:
In Start / Stop: Available
Out Start / Stop: Available
In Lock/ Meeting: Available
Out Call / Lock: Available

EXTERNAL INPUT:
Input configuration: Electronically balanced
Input Impedance: 10 K? (600 ? wired selectable)
Input Level Range: ±12 dBu (Digital adj. step 0,5 dB)
Headroom: + 18 dBu
Connector: DSUB 9 pole female

ANALOG OUTPUTS:
Output configuration: Electronically balanced
Output Impedance: 100 ?
PGM Output Level Range: -2 ÷ +13 dBu (1 dB step dip switch selectable)
Connector: DSUB 9 pole female
UTL Output Level Range: -2 ÷ +13 dBu (1 dB step dip switch selectable)
Connector: DSUB 9 pole female
C Room Mut.Output LevR: -2 ÷ +12 dBu
Connector: DSUB 9 pole female
C Studio Mut.Output LevR: -2 ÷ +12 dBu
Connector: DSUB 9 pole female
C Studio no Mut.Output LevR: -2 ÷ +13 dBu (1 dB step dip switch selectable)
Connector: DSUB 9 pole female

DIGITAL OUTPUTS:
Output configuration : AES/EBU, IEC958,S/PDIF & EIAJ CP340/1201
Sample Rate: Automatic 32, 44.1, 48, 96 KHz converter
Connector: DSUB 9 pole female, Optical

HEAD PHONES (C.Room no Muted):
Configuration Type: Stereo unbalanced
Output Impedance: 50 ?
Connector: JACK 6 mm

DIGITAL CONTROLS:
Tally 1 OUT: Available
Connector: JACK 6 mm

LOGIC INPUT:
Configuration: Opto-coupled (with internally 330? protection)
Typical Voltage input: 5 Vdc (for 10 mA input)
Max Reverse Voltage: 5 Vdc
Connector: DSUB 15 pole female

LOGIC OUTPUT:
Configuration: Optic solid state relay
Max Voltage: 50 Vdc/ac
Max Current: 100 mA
Connector: DSUB 15 pole female