-
The Microtech Gefell MT71S features original M7 capsule, fixed cardioid pattern, -10dB pad and bass roll-off switch. Transformerless output stage. Phantom powered, comes with deluxe wood case. Satin nickel finish.
The Microtech gefell MT 71 S studio condenser microphone, equipped with our reliable large-diaphragm capsule, features outstanding performance, high sensitivity, and improved signal-to-noise ratio. The MT 71 S guarantees particularly clean and colourless sound reproduction. It is well-suited for instrumental and vocal soloists in radio and television broadcasting and any other kind of accurate production. The pressure gradient transducer is a dual-capacitor design that uses a single brass back-plate and two large-diameter gold-plated plastic diaphragms.
The transformerless circuit design substitutes the previous transformer for a symmetrical output stage yielding a superb transient response combined with a high RFI rejection. The circuit technology also achieves a wider dynamic range by lowering the self-noise floor and increasing the headroom for loud signals. A 10 dB attenuator has been installed to reduce the sensitivity of the microphone when placed near very loud sound sources. A sensitivity reduction for low frequencies can be utilized to suppress the proximity effect.
- condenser microphone
- cardioid
- large diaphragm capsule
- PVC diaphragm
- transistor pre-amplifier
- phantom powering P48
product contents
in wooden case 275 mm x 90 mm x 70 mm
Optional Accessories:- MH93.1S
- MKV9 stand adapter
- W76 windscreen
- EA21S locking shock mount
- AT8410a spring clip shock mount
technical data
Polar pattern cardioid Acoustic operating principle pressure gradient transducer Frequency range 20 Hz to 20.000 Hz Sensitivity at 1 kHz 13 mV/Pa ± 3 dB Switch position "reduced bass roll-off" at 90 Hz -10 dB ± 1 dB Output impedance 150 Ohm Noise level CCIR 468-4 22 dB DIN EN 60268-4 14 dB-A Signal-to-noise ratio CCIR weighted 72 dB A-weighted 80 dB SPL for THD 0,5 % 134 dB with 10 dB preattenuation 144 dB Dynamic range 120 dB Current consumption 3 mA Output connector XLR3M Weight 285 g Length 217 mm Diameter capsule 42 mm preamplifier 21 mm Surface satin nickel frequency curves
MT 71 S cardioid
polar diagrams
MT 71 S cardioid
| Title | Type | Size | Download |
|---|---|---|---|
| Microtech-gefell-MT-71-S-brochure.pdf | 148.30KB | Download |
Customers who bought this product also bought
