EuroCaster STL Link STEREO mod.ECL-T+R VHF/UHF 10W 200-470 MHz / 830-960 MHz - w. sub-band +/-10MHz

Complete STL transmitter 10W and STL receiver - Stereo version, balanced XLR, in/out.

Transmitter mod. ECL-T Features

Frequency Range: 200~960 MHz <20MHz sub-band
Type of Modulation FM Class F3
VCO Tuning 25 MHz
Frequency Stability ± 2,5ppm (Better 0n request)
Synthesizer Step 25KHz
Power Output 10W or 20W(H) or 30W(UH ? 400÷470MHz)
Spurious Emission < -80 dB or better
Harmonic Emission < -65 dB (-80 dB on request)
Stereo Separation > 55 dB @ 1 KHz
Distorsion < 0.2% (TYP 00.8 %) @ 1KHz)
Base Band 30 Hz ÷ 60 KHz within 0.15 dB
Unweighted S/N Ratio > 72 dB rms at 30Hz ÷ 20KHz
Enphasis 50 or 75 µS - selectable
RF Connectors N-F 50Ohm
Input Base Band Imp. 2 KOhm
Input Mono Impedence 600 Ohm Option 1
Stereocoder built-in Option 2
RDS coder built-in Cooling
Forced air OP. Temperature Range 0 ÷ +50°C
Maximum Umidity 90%
AC Supply 100 ÷ 240 Volt; 47 ÷ 63 Hz
Dimension 1 Units Rack 19" 44 cm Depth Weight 6.8 Kg

Receiver mod. ECL-R Features

Frequency Ranges 200~960 MHz <20MHz sub-band
Type of Modulation FM Class F3
VCO Tuning 25 MHz
Frequency Stability ± 2.5 ppm (Better on request)
Synthesizer Step 25KHz
Image Rejection 60dB Typ.
RN Noise Figure 6dB or lower
Stereo Separation > 45 dB @ 1 KHz
Distorsion < 0.5% (TYP 0.2 % @ 1KHz)
Base Band 30Hz÷60KHz within 0.08 dB
S/N Ratio > 72 dB with 0.2 mV input (Typ 78 dB)
Deenphasis 50 or 75 µS int. selectable
RF Connectors N-F 50 Ohm
B. Band-IF Conn.
BNC-F Base-Band Imp. < 30 Ohm Option 1
StereoDecoder built-in
Cooling Forced air
P. Temp. Range 0 ÷ +50°C
Maximum Umidity 90%
AC Supply 100 ÷ 240 Volt; 47 ÷ 63 Hz
Dimension 1 Units Rack 19" 44 cm Depth Weight 6.2 Kg

Options:

20 watt verision.
Stereo-encoder in link transmitter.
Stereo-decoder in link receiver.

Remember to inform of frequency band +/- 10 MHz from center frequency.