DwarfConnection DC.Link-ULR1.MKII WDHI Set (without power supplies)
content of the box: 1x TX, 1x RX, 9x Antenna , 2x D-Tap Cable 4pin, Magic Arm & Hotshoe Mount, Case DC.X.0027
ULR1 | Video radio with SDI and HDMI up to a distance of 1200m based on WHDI technology.
The DwarfConnection DC-LINK-ULR1 is the flagship of the 2nd generation of video radio systems from DwarfConnection. With a range of up to 1200m in direct view, it is one of the most powerful WHDI systems on the market. Like all 2nd generation video radio systems, the ULR1 is downward compatible and can be combined and expanded with the entire DFS-free DC-LINK portfolio.
To find the optimal channel, the ULR1 has a frequency scanner and an antenna function monitor, the so-called DC-SCAN, which can be output via the HDMI port on the receiver. The wireless transmission of video signals and the frequency monitor can only be used alternately.
DC-LINK radio systems achieve their particular stability by deliberately dispensing with a DFS system (Dynamic Frequency Selection), which means that they may only be used on the intended channels indoors.
The fans can be regulated or switched off for both transmitters and receivers. The on-screen display (OSD) can also be switched off especially for use in the live area.
An OLED display on the transmitter and receiver provides information about the selected channel, the temperature and the charge level of the battery. Five large LEDs on the receiver indicate the reception quality even in bright surroundings.
The Dwarf ULR1 video radio transmits time code as well as start and stop signals. It is also one of those video radio systems that support fast switching between camera image and recording.
-
Up to 1200m wireless video
-
Uncompressed video up to 1080p60 4: 2: 2 10-bit
-
4: 4: 4 sampling possible with exclusive transmission of the video signal via HDMI input and output
-
Frequency scanner via HDMI output
-
Antenna function monitor via HDMI output
-
Adjustable fans, can be switched off in cinema mode
-
OSD can be switched off
-
OLED display on the side
-
Temperature display on the transmitter
-
Supports META data and start / stop function
-
Fully compatible with CLR1, CLR2, LR1, LR2,
-
Delay less than 1ms
-
3G-SDI & HDMI via the built-in converter
-
Works with an unlimited number of wireless receivers
-
Manual frequency selection - does not require pairing
-
Stable connection using the preset channels and no DFS
-
Works with 5GHz ISM band (license free)
Tech Data:
|
Connector |
1x SDI Input (BNC female) 1x SDI Output (BNC female) 1x HDMI Input (Type A female) 2x Antenna (RP-SMA male) 1x DC Input (4-pin female) |
2x SDI Output (BNC female) 1x HDMI Output (Type A female) 5x Antenna (RP-SMA male) 1x DC Input (4-pin female) |
|
Input Voltage |
9,0 - 18,0V DC |
9,0 - 18,0V DC |
|
Power Consumption |
< 8 W |
< 8 W |
|
Dimensions |
143,5 x 74,5 x 21,4mm |
148,8 x 100 x 20mm |
|
Weight |
380g |
540g |
|
Supported Video Formats |
1080p (60, 59.94, 50, 30, 29.97, 25, 24, 23.98) 1080i (60, 59.94, 50) 720p (60, 59.94, 50) 576i (50) 480i (59,94) |
1080p (60, 59.94, 50, 30, 29.97, 25, 24, 23.98) 1080i (60, 59.94, 50) 720p (60, 59.94, 50) 576i (50) 480i (59,94) |
|
Audioformat |
SDI embedded 2 Channel Audio 24bit/48kHz |
SDI embedded 2 Channel Audio 24bit/48kHz |
|
Displays |
0,91 Zoll OLED Panel |
0,91 Zoll OLED Panel 5 LEDs for RSSI Display |
|
Battery holder |
NPF |
V-Mount |
|
Transmissionstrength |
Weniger als 20dBm |
- |
|
Reception Sensitivity |
- |
- 75 dBm |
|
Bandwidth |
40MHz |
40MHz |
|
Temperature |
0 - 40°C (In Use) -20 - 60°C (In storage) |
0 - 40°C (In Use) -20 - 60°C (In storage) |
|
Conformity |
CE |
CE |
