Complete DAB+ Packages 80W RMS / 350W ERP 8 Channels

Complete DAB+ Package – turnkey, ready to go on air with 80W RMS / 350W ERP - 8 channels – 1 site:

1 x EuroCaster MUX-01, 1 Channel DAB+ Multiplexer, optional expandable up to 18 channels.

enables different bitrates and bandwidths and is adjustable from 32kbps up to 192 kbps at all possible error protection levels per channel;

has advanced audio encoder profiles available in its settings such as AAC-LC, HE-AAC and HE AAC V2;

has the possibility to set personal preference parameters, but the optimal encoder parameters are automatically suggested for each setting;

encodes multiple sources: AES/EBU, Livewire/AES67, Icecast, Shoutcast and PCM streams in the highest possible audio quality;

provides MOT Slideshow and DLS / SLS services;

is easy to set up via an user friendly menu;

has a multiplexer which provides an EDI stream according the DAB+ ETSI TS 10563 protocol, suitable for the latest DAB+ transmitters; and

has online remote support optional available and future /updates can be installed over the internet;

is available in a 1HU-unit with a clear display which shows basic settings of the performance of the head-end.

8 x EuroCaster 1 channel digital audio encoder

EuroCaster ENC-01 encoder is provided with an analogue audio input as well;

EuroCaster ENC-01 encoder encodes multiple sources: AES/EBU, Livewire/AES67 in the highest possible audio quality;

EuroCaster ENC-01 encoder is available in a 1HU-unit with a clear display which shows basic settings of the performance of the head-end;

has online remote support optional available and future updates can be installed over the internet;

is easy to set up via a user-friendly menu.

In the EuroCaster ENC-01 DAB+ headend AAC+ encoder, different bitrates and bandwidths are adjustable from 32kbps up to 192 kbps at all possible error protection levels per channel. Advanced audio encoder profiles such as AAC-LC, HE-AAC and HE AAC V2 are available in the encoder settings. Although personal preference parameters can be set, the optimal encoder parameters are automatically suggested for each setting.

1 x EuroCaster´s Single channel AIR COOLED VHF Band III transmitter

The TX Series is EuroCasters most amazing achievement, as it combines a complete transmitter with output power up to 150W rms or 250W p.s. and multiple input interfaces in a single 1U 19” rack chassis. This astonishing engineering is today a unique and unequaled solution in the market.

Supporting DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL and NTSC modulations (dual-cast Analog and Digital is also supported), TX-Series natively offers adaptive pre-correction circuits and built in GPS / GLONASS receiver for accurate synchronization and SFN operations.

Whether you need a Terrestrial or Satellite fed transmitter, re-generative repeater, transposer, or even regenerative gap-filler, then TX is the required solution as it can be equipped and configured with different input interfaces (Satellite Receiver, ASI, ETI, EDI, Gigabit Ethernet or RF).

Gap-filling operation is made possible by a powerful echo-canceller and, if necessary, by our award winning Spectrum Restorer regenerative gap-filler (EDOCR).

For the South American ISDB-Tb market, TX-Series combines Satellite Receiver, Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter and up to 130W Transmitter in a single 1U box 19” rack!

Main features:

Compact 1U 19” Rack chassis

Output Power up to 80W rms in digital or up to 200W p.s. in analogue

High efficiency broadband amplifier technology in VHF bands

DAB/DAB+ modulations fully supported

Adaptive pre-correction circuits

Powerful echo canceller when TX-Series is used as an on-channel repeater

Optional internal demodulator with equalizer for regenerative transposers

Equalized Digital On-Channel Repeater (Spectrum Restorer) configuration available

On-board high stability GPS / GLONASS receiver with battery

Flexible input interfaces:

4 x ASI inputs (TS, BTS, T2MI, SMPTE-310M) + Analog input

2 x ASI inputs and 2 x Gigabit Ethernet

4 x ETI or 2 x ETI + 2 x EDI inputs

1 x RF input

SNMP, Web Interface and Touch Screen display

1 x Antenna system consist of: 4 dipole aluminum antenna system with 7 dB gain including 40 meters of 7/8” feeder cable.

1 x Output filter