For-A FA-1010
Extreme connectivity 10 Frame Syncs & 10 Color Correctors
All-Round Frame Synchronizer
Frame synchronizer equipped with an array of essential functions used in video production and that allow multi-channel routing (10-input/10-output video). Supports 3G-SDI and HD/SD-SDI input/output as standard and includes all typical FS and CC (standard) features. Highly versatile audio signal processing capability with delay adjustment and remapping functions plus a sampling rate converter. Combining these varied options allows a single unit to provide optimal functionality for all video production scenes, including those used in transmission, outside broadcasting, news reporting, production, editing and distribution.
Block Diagram
Reasons to Buy
Ten processors in a single unit
The FA-1010 is not simply 10 processors enclosed in a single housing, but 10 interconnected internal circuits. It implements all the various processors and clean switch functions required to build a system, and enables multi-channel signal processing on each channel with no cable connections. In addition, as ancillary and audio signal data are handled separately from video signals, concerns about ancillary data such as subtitles and time codes being erased can be allayed.
Powerful audio processing
With 16 channels of 3G/HD (synchronous/asynchronous) and SD-SDI*1 (synchronous) embedded audio on each input supporting up to 160 channels on all 10 inputs, a versatile array of signal processing is possible, including standard SDI embedding and de-embedding, and if an optional expansion card is installed, A/D and D/A conversion. The analog audio input option is equipped with a microphone head amplifier and phantom power, enabling direct condenser microphone input with no need for impedance conversion. The unit also includes sampling rate converters as well as various other processes such as level adjustment, delay adjustment, down-mixing*2, remapping, and polarity conversion.
- Audio SD-SDI output is 12-channel output
- Down-mixing supports only SDI-embedded audio signals
Space-saving form factor
With the capability of 10 processors fit into a 1U size, the FA-1010 provides a smaller equipment footprint. In addition, it is perfect for systems that handle a large number of inputs and outputs, such as network operation centers, and systems where equipment space is limited, such as mobile video production trucks.
Color correction function on each input
In addition to proc amp., the FA-1010 incorporates a color correction function, allowing color correction to be performed in three color correction modes, which offer a flexible color adjustment environment that includes gamma adjustment, clipping, and various level adjustment functions.
Inter-convertible 3G-SDI level-A/B signals on each input
Connectivity difficulties can arise when building a 3G-SDI system that mixes level-A and level-B-compatible products. The FA-1010 allows a system to be assembled that unifies the signals of either kind, with level-A/B input signals inter-convertible on each channel.
10x10 clean switch
The FA-1010 comes standard with 10x10 video and audio clean switches to route the ten output SDI signals after processing.
SDI I/O relay bypass
To cope with a power outage or emergency, the FA-1010 includes an I/O bypass function.
Powerful audio remapping
You can remap which audio signal channels to assign to each video or each audio channel. Up to 160 channels of audio signal can be freely re-mapped as standard, or up to 192 channels when optional cards are installed. Delay adjustment and polarity conversion are also available on each channel, allowing systems to be configured without any special audio processing equipment.
Usable as a 4K-compatible processor
A video channel link allows you to collectively control channel parameters you want linked. The FA-1010 offers a special 4K mode that uses this capability. 4K (QFHD) square division signals can be controlled as if they were one signal.
An abundance of control systems
The FA-10RU remote control unit provides dedicated access to the full features of the FA-1010 and can control up to 100 FA-1010s. One FA-1010 is also able to be controlled from multiple remote control units or GUIs at the same time (with up to ten concurrent connections possible).
The FA-10DCCRU remote control unit for color correction has inherited the traditional operating style of FOR-A's color corrector series of products and offers direct access to a variety of parameters for smooth color adjustment.
The FA-AUX30 remote control panel facilitates access to the rich functionality of the FA-1010. Its switch box works over a GPI connection and can be used to freely assign router panel button functions to the 30 front panel buttons, and to assign shortcuts for each function. In addition, preset patterns are prepared in advance in the GPI settings, allowing you to begin using the FA-AUX30 immediately, with no detailed configuration required.
Easy-to-use GUI
The FA-1010 comes standard with a dedicated application that runs on Windows, providing full access to many functions, and allows a wide variety of settings. Web server functionality is also implemented in the main unit, allowing adjustments* to be made to various parameters from mobile and tablet devices.
- This feature is available for a limited number of function and parameters.
Efficient cooling system
The FA-505 is designed to offer efficient cooling during extended use. Air that is taken in through the front panel inlet holes cools the inside power supply and other components, and is exhausted through the side and rear panels. The air intake is pulled straight through the inside and out the exhaust vents for efficient cooling, reducing retention heat throughout the whole unit.
Frame synchronizer
FOR-A's frame synchronizers have always exhibited superior performance when processing poor quality video signals. Frame, Line, and AVDL synchronizer modes are available. Every mode allows both H and V ancillary data to be passed through*.
- Different input/output formats may limit the number of packets that can pass through.
Frame Sync mode
Aligns the output with a genlock signal and can be used whether or not the genlock signal and video input signal are synchronized.
Line Sync mode
Locks the output to a genlock signal within a range of ± 1/2 lines and can be used only when the video input and genlock signals are synchronized.
AVDL mode
Locks the output to a genlock signal with a constant time offset of 5H in HD and 1H in SD. The feature can only be used when the video input and genlock signals are synchronized.
Line Sync (Minimum) mode
Outputs the input signal with minimum delay. It can be used only when the video input and genlock signals are synchronized.
Proc. Amp.
Allows video, chroma and black levels and HUE to be adjusted. Individual channels are also able to be adjusted and to control multiple channels collectively via channel link. A split view function allows pre- and post-correction results to be examined.
Color corrector
FOR-A’s color corrector, with its proven track record in the broadcasting industry, comes standard on each channel. Three available color correction modes can be freely used on the ten input channels, with color adjustment performed alone or in groups. It is even possible to link channels while maintaining differences between parameters.
- Balance mode: Provides RGB color correction
- Differential mode: Provides color correction without upsetting white balance
- Sepia mode: Converts colors into a monotone or sepia
Each parameter comes with a Unity button, a familiar FOR-A color correction feature that allows parameters to be restored to their default state with the push of a button.
A split view function allows pre- and post-correction results to be examined. Also able to be used as a 4K color corrector in 4K mode.
Clip function
The FA-1010 has inherited another set of familiar FOR-A color corrector features, Y/PB/PR and RGB clip functions that allow color information to be kept within an optimal range.
- Y/PB/PR clip: Adjusts excessively bright or dark color information within a range using white and black clip functions while maintaining white balance.
- RGB clip: Adjusts excessively bright or dark color information within a range using white and black clip functions, compensating for unintended color information generated during recording.
Selector functions on SDI input and output
The FA-1010 comes with an SDI input and output selector function, allowing for the input processing path and output terminal to be selected.
Clean switch
The output unit comes equipped with a clean switch that delivers smooth changeover of both video and audio, free from noise and shock. Switching methods include Direct Mode, which allows direct crosspoint operation, Take Mode for switching multiple crosspoints using a single Take operation, and Salvo Mode, which saves and switches cross point settings all at once. Clean switching allows the FA-1010 to be utilized as a processing-based routing switcher.
Delay adjustment
The FA-1010 comes equipped with a frame buffer that stores up to 8 frames. Delay adjustments can be individually applied to each channel.
Input and output bypass
The FA-1010 comes equipped with a bypass function that allows video to bypass processing and be output in case of power failure or an emergency.
ANC MUX/DEMUX
Ancillary (ANC) signal that is superimposed on video signals are first isolated, then processed separately, from the processing circuits. Whether to have ANC data pass through directly on each channel, or to have the superimposed ANC data re-superimposed or left blank, can be selected.
Time code inserter/generator
In addition to inserting external LTC time codes, use of the internal time code generator can be selected. For each channel, select whether to Pass or comply with the external or internal TC. The built-in LTC connector can be used not only for external LTC input but also as the external output of the internal TC (selectable).
Test signal output
Each channel is able to output a 100%, 75% or SMPTE color bar, or Ramp signal as a test signal.
Event memory
Up to 100 different parameter settings are able to be saved in the internal event memory of the main unit. The settings data can be backed up and restored using a PC.
SNMP
SNMP is supported as standard and can even be used to monitor power supply, fan, and signal alarms.
Audio
Sixteen channels of embedded audio for each video line
16 channels of embedded audio per line of 3G/HD (synchronous/asynchronous) or SD-SDI* (synchronous) input supports up to 160 channels of powerful audio input processing on all 10 inputs.
- 12 channels of audio for SD-SDI output
Supports up to 192 channels with the addition of the optional audio card
The FA-1010 provides digital and analog audio I/O as options. An optional expansion card allows A/D and D/A conversion, MUX/DEMUX and remapping, in combination with the embedded audio signal.
FA-10AES-BL: Balanced digital audio I/O
Enables 4 lines (8 channels) of balanced digital audio input/output.
FA-10AES-UBL: Unbalanced digital audio I/O
Enables 4 lines (8 channels) of unbalanced digital audio input/output (4-channel input/output switching).
FA-10ANA-AUD: Analog audio I/O
Enables 2 lines (4 channels) of balanced or unbalanced analog audio input/output.
Gain adjustment
Gain adjustment available on each audio channel. A Unity button allows values to revert to default at the push of a button.
Sampling rate conversion
All digital audio channels come equipped with sample rate conversion circuits that allow the system output to be synchronized.
Delay adjustment
Delay adjustment can be set for each audio channel in 1-ms steps, up to 1,000 ms. Collective delay adjustment for each audio grouping is also possible. A Unity button allows values to revert to default at the push of a button.
Channel remapping
Audio channels to be embedded into video can be freely changed and re-ordered, remapped, across all ten video channels. This function is a useful as a replacement for an optional audio channel or for main- and sub-audio channels.
Down-mixing
Useful for tasks such as converting from 5.1-channel audio to stereo, this function allows the assigned channel to be changed to any L, R, Center, Ls or Rs channel, the gain to be adjusted, and the down-mix mode selected. A Mono Sum mode also allows a stereo channel pair to be converted to monaural.
Polarity reversal
The polarity of each audio channel can also be reversed, allowing you to correct an audio channel that has unintentionally fallen out of phase.
Master mute
This function allows you to mute the audio for each video channel or optional audio card.
Test signal output
This function allows you to output a 500 kHz or 1 kHz reference signal from each video channel or optional audio card, or a reference signal from each audio channel.
| Title | Type | Size | Download |
|---|---|---|---|
| FOR-A-FA-1010.pdf | 623.58KB | Download |