Teko Broadcast AXON Compact FM transmitter Stereo
Professional Compact Solid State Stereo FM Transmitter and Exciter with available options like Dynamic RDS coder and HTML5 WEB TCP/IP and SNMP connectivity for remote Access
Audio input and modulation selectable in MPX (Composite), and optional Stereo, Digital AES/EBU or Mono.
Teko Broadcast AXON Is produced in a wide Range of Output Power: 30W (30 watts), 50W (50 watts), 60W (60 watts), 100W (100 watts), 150W (150 watts), 300W (300 watts), 500W (500 watts), 600W (600 watts), 1000W (1000 watts, 1kW) and 1200W (1200 watts, 1,2kW).
Analogue Frequency Modulation from 87.5 MHz to 108.0 MHz. Japanese (JPN) JAPAN, Russian (OIRT 66 - 47 MHz) and more bands are options available – Kindly check the related items or contact us for assistance and pricing.
The Sound Quality of the Music is the most important feature of AXON Series, features with Warm Softness, Deep and Clean Crystal Sound. This excellent audio quality highlights the mood of the radio giving a measurable competitive advantage compared with any others brand of transmitters
Exclusive Distortionless Intelligent Soft Limiter keeps the maximum deviation in the 75kHz limits giving always the maximum possible volume without introducing of any kind of distortion.
AIR FILTER provides high protection to the internal components.
LCD front panel display, Direct Access Keys command and LEDs indicators allows immediate control and visualization of the overall status of the transmitter.
N+1 Profiles connector provides 7 different memories selection. Memory settings are located in the internal memory and can be selected remotely and locally.
High efficiency LDMOS technology up to 80% efficiency, total spectral purity.
Teko Broadcast AXON can be used as a Low, Medium or High Power FM Transmitter, in a stand alone station, as well as driver in complex high power FM Radio Transmitters and N+1 systems.
HIGHLIGHTS
- Professional analogue compact FM transmitter with: MPX (composite), stereo, digital AES/EBU and mono audio base band inputs.
- Analogue Frequency Modulation from 87.5 MHz to 108.0 MHz. Available in JPN JAPAN and OIRT frequencies.
- Excellent audio fidelity with soft, deep and clean crystal sound. very low signal to noise, very low distortion and high stereo separation thanks to digital stereo coder
- Dynamic RDS encoder with TMC function
- Wide range of power available from 30w to 1200w
- Air filter and PCB boards fully tropicalized gives high protection to the internal components.
- Aluminium air ducted: an exclusive design of the air flow, guide the air into aluminium ducts avoiding contact of the air coming from the fans with the electronic components. this avoid failures produced by the air corrosion
- Totally made in aluminium: for minimum weight and maximum robustness
- Easy maintenance: all parts, RF modules, electronic control boards, blowers, power supplies are easy to replace.
- Uninterrupted service thanks to intelligent software protections
- Free failure design thanks to hardware fast protections
- Solid State LDMOS technology up to 80% High Efficiency constant at any power level
- Total spectral purity: better than -90 dBc spurious and harmonics for highest RF signal quality
- Friendly User Interface with Direct Keys for main commands and LEDs indicator to shows overall status, smart browsing with ENTER and ESC Keys
- All the LINE of FM Transmitters shares the same spare parts
- Parallel remote control connectors
- Seven selectable profiles connector for use in N+1 system
- Full- range power supply: 90-260 vac mains voltage
- Compliant with all the standard: ETSI – CCIR – FCC.
- External 10mhz and 1pps synchronization for use on SFN (Isofrequency) applications
- Remote control by WEB TCP/IP and SNMP of all signal parameters controlled by internet without the help of any external box or accessories
- All the wired line shares the same spare parts
- Over-dimensioned components that determine the reliability: heat sink, fans, dummy loads, LDMOS, power supply
- Copper Carrier on active power components such as LDMOS or unbalanced power resistors
- Hot plug-in power supply
- Standard market available power supply
- SMP: superior modular philosophy: Modularity with very light amplifier modules (less than 17kg/34lbs each)
- Lowest lost of power of the market in case of failure of one module.
- Top seller in Governmental, Private Networks, Commercial and Community radio stations
- Mirror network mirror system available to keep track of function of all parameters on time. It records millions of parameters collected every year.
- Touch screen WEB Based Brain Control Unit.
COMPACT ARCHITECTURE FM TRANSMITTERS
- Compact architecture means: the complete FM transmitters is build the in a single chassis and cover all the functions: FM Exciter or Modulator and FM Amplifier.
- The Compact configuration is well suited for low power up to 1 kilowatt or maximum 2 kilowatts.
- Limit power to use compact configuration
- Transmitters in compact configuration over 2KW becomes less reliable and difficult to maintain.
- The weight of a compact transmitter is extremely important because, if too high, there are needed two people to handles it increasing the cost of maintenance on site.
- Last but not last, in case of fault all the transmitter remains off-air creating big troubles to the broadcasters. In the case of power, higher than 2kW, of course, modular configuration is the more reliable choise.
Brief description of the principle of functioning of an FM Exciter-Modulator
The FM Exciter is devoting to take-in the Base Band or Audio Input and to create the RF Signal, with frequency modulation to be transmitted.
The Base Band Inputs are: Mono, Left & Right, Composed MPX or Digital AES/EBU.
The base band signal, inside the Modulator, suffer several electronic process to obtain the 75kHz frequency deviation.
In case of stereo, the Left and Right channels are coding to get the composed signal MPX to be transmitted.
Depending on settings Pre-emphasis is applied
Once the base band composite MPX signal is completely process is carried to the VCO to be modulated and converting this amplitude information in frequency modulation information.
The quality of this process have direct impact on the final quality of the sound of the radio.
The last link on the equipment chain, responsible of transmit all the quality of the audio is the FM Modulator.
Each of this process require high precision on the treatment of the signal. For this reason, the broadcaster must choice only Top Quality Professional Broadcast Equipment.
AXON Series of FM Transmitters full fill this requirement.
PROFESSIONAL ANALOGUE FM TRANSMITTER WITH MPX COMPOSITE, STEREO, DIGITAL AES/EBU OR MONO AUDIO BASE BAND INPUTS.
AXON is a Professional FM Transmitter/Exciter with Analogue Frequency Modulation from 87.5 MHz to 108.0 MHz setting in 10 kHz step and a frequency stability better than 2 ppm.
Audio base band input and modulation mode selectable in: MPX (Composite), Stereo, Digital AES/EBU or Mono.
EXELLENCE AUDIO FIDELITY WITH SOFT, DEEP AND CLEAN CRYSTAL SOUND. VERY LOW SIGNAL TO NOISE, VERY LOW DISTORTION AND HIGH STEREO SEPARATION.
The Sound Quality of the Music, the most important feature of AXON Series, features with Warm Softness, Deep and Clean Crystal Sound. This excellent audio quality highlights the mood of the radio giving a measurable competitive advantage compared with any others brand of transmitters.
Very low S/N typical 85 dB, high stereo performance coder with typical 65 dB Stereo Separation and Ultra Low distortion 0,01%.
Exclusive Distortionless Intelligent Soft Limiter keeps the maximum deviation in the 75kHz limits giving always the maximum possible volume without introducing of any kind of distortion.
AES-EBU digital input 24 bit resolution with 32, 44.1, 48, 96 KHz sample rate automatically selected.
AIR FILTER AND PCB BOARDS FULLY TROPICALIZED
All our products are equipped with an AIR FILTER mounted on the front panel and easy to clean or replace.
The PCB Boards and the wiring are fully tropicalized by a specific coating for electronic assembly.
Air Filter and Tropicalization provides high protection to the internal components when the equipment is installed on places with dust, humidity, salt and pollution.
These precautions guarantee a long life in extreme environmental conditions, preventing damage due to corrosion and erosion, protecting the components from the inclemency of the tropical climate.
Copper Carrier on LDMOS Active components and unbalanced Resistors
active power components such as LDMOS or unbalanced power resistors are mounted on a copper carrier to improve heat dissipation and greatly facilitate maintenance, in fact in cases where LDMOS is mounted directly on the heat sink, it causes high heat sink dissipation and it becomes almost impossible to heat the weld.
ALLUMINUM AIR DUCTED 2U CABINET
The equipment is housed into a compact rack mountable 2 Unit Aluminium cabinet.
An exclusive design of the air flow inside the transmitter guide the air into aluminium ducts avoiding contact with the electronic components.
Every component that produces heat is mounted on a heat sink.
Air passes exclusively into the aluminium heat sink avoiding contact with the electronic components.
UNINTERRUPTED SERVICE WITH HARDWARE AND SOFTWARE PROTECTIONS
There are two kinds of protection: Fast Hardware Protection and Soft Software Protections
In some conditions, like a short-circuit on the antenna or coaxial cable, the protection must be hardware and act in few nanoseconds. In fact, the software in this case is not fast enough to grant the protection of the equipment.
When the fault condition is soft, like the increase of VSWR caused by snow or humidity, a software protection can be use.
On the AXON series of FM Transmitter are implemented both: Fast Hardware Protections and Soft Software Protections.
The software protection reduces the output power without on-air interruption, keeping the RF devices always within the safe operating parameter.
The transmitter is protected in case of:
- Load mismatching, antenna short/open circuit.
- Environmental over-temperature
- Cooling failure
- Amplifier breakdown
- Over and Under Voltage DC
- Over and Under Voltage AC
- RF and Power Supply Temperature
Beyond the Hardware or Software protection, the transmitter is designed to be rough itself, to keep it functioning perfectly even in the worst case of operating conditions.
To achieve this, the important components of the transmitter are over-dimensioned or with hardware protected:
- 6th generation LD-MOS High Efficiency and VSWR 65:1.
- Over-dimensioned switching power supply with PFC (Power Factor Corrector)
- Over-dimensioned Heat Sinks and Fans
- Integrated AC Mains filtering
- Integrated lightning protection
- Integrated overvoltage spikes on the mains protection.
HIGH EFFICIENCY LDMOS TECHNOLOGY UP TO 80% EFFICIENCY CONSTANT AT ANY POWER LEVEL
AXON use Solid State RF power devices, 6th generation LD-MOS High Efficiency and VSWR 65:1 to deliver high reliability and low energy consumption.
The high Efficiency is keep constant at any power level thanks to an intelligent algorithm that control the Voltage Power Amplifier and the Bias to obtain maximum efficiency at any frequency and at any output rated power.
TOTAL SPECTRAL PURITY: > -100 DBC SPURIOUS, > - 84 DBC HARMONICS
The RF module amplifier design and the output filter broad band keeps optimum performances on spectral purity without needing of tuning.
USER FRIENDLY DIRECT KEYS AND LEDs INDICATOR USER INTERFACE
LCD front panel display, Direct Access Keys command and LEDs indicators allows immediate control and visualization of the overall status of the transmitter.
Quick and easy navigation trough menus creates an User Interface friendly, simple and intuitive together an immediate learning, full control and measurements of all working parameter: Output Power Power, Frequency (from 87.5 to 108 MHz), SCAs, Stereo/Mono/MPX, Dynamic Limiter etc.
TOUCH SCREEN BRAIN CONTROL UNIT
The control unit have the specific function to supervise the transmitter, even in case of failure of it (or turned off) manual control of the transmitter guarantee perfect operation.
Weekly scheduler Power Derating
The output power can be programmed depending on time for energy consumption optimization management.
OPTIONS AVAILABLE – please find them in related items or contact us for price.
- Wide range of options available reduces the need of any additional equipment:
- High performances Stereo Encoder
- Digital AES/EBU
- Dynamic RDS Encoder with TMC Function
- AOIP Audio Over IP
- WEB TCP/IP and SNMP connectivity for remote Access
- Japanese (JPN), Russian (OIRT) and more bands are options available.
- Parallel Remote Control Connector Interface
REMOTE CONTROL BY TCP/IP: WEB + SNMP OF ALL SIGNAL PARAMETERS
Web control
E-mails configuration available (sent in case of alarms).
Web log file: Up to 64000 events stored in the web board. The log file is saved in the PC in common text format (.txt)
SNMP v2c with Traps and Informs
Weekly scheduler page Available for the modification of the basic parameters of the unit up to 4 times for each day
Extremely detailed web control with all main parameters fully controllable and adjustable, available without proprietary tools. Weekly scheduler page with up to 4 events for each day for energy consumption optimization management.
REMOTE DEEP DIAGNOSTIC CAPABILITY: The industrial standard allows to safety handle huge quantity of information to perform remote deep diagnosis.
Measurements of more than 100 operational parameters including current, voltage and temperatures of each power supply and each RF module
PARALEL REMOTE CONTROL CONNECTORS
Parallel Remote Control Connector Interface with dry contact relay outputs and opto-isolated inputs with the following signals available: on/off, local/remote, alarm status, RF higher than a preset threshold, reset of alarms, change between 6 available memories (for 6 different configurations of the unit).
N+1 Profiles connector: provides 7 different memories selection. Memory settings are located in the internal memory and can be selected remotely and locally.
TOP SELLER IN GOVERNMENTAL, PRIVATE NETWORKS, COMMERCIAL AND COMMUNITY RADIO STATIONS
Teco Broadcast AXON Is one of the most used FM Broadcast Transmitter on the Top Ranked Governmental and Private Networks, Commercial and Community Radio Stations
For any application AXON is the ultimate solution that meets most demanding customer’ requirements and guarantees professional features at affordable price
COMPLIANT WITH ALL THE STANDARD: ETSI – CCIR - FCC.
AXON meets all the most rigorous electromagnetic quality standards
To combine both, our mission of give maximum reliability to our products and even supply modern products with maximum performance we have adopted unique solutions in the broadcast.
AXON TECHNICAL CHARACTERISTICS BRIEF
- Frequency Range: 87.5 ÷ 108.00 MHz
- Modulation Mode: Mono, Stereo, Multiplex, SCA, RDS, Aux.
- Input Level: -3 to +6 dBm.
- Pre-emphasis: Flat(0)/50/75 µs selectable from front panel.
- FM S/N Ratio: -89 dB
- AM S/N Ratio: -60 dB
- Total Harmonic Distortion + Noise: 0.03% @ 400 Hz
- Transient Intermodulation Distortion: 0.03%, 2.96KHz square wave and 14 KHz sine wave.
- Monaural: Audio Frequency Response: ±0.15 dB, 30 Hz to 15 KHz. Input Connector: XLR female.
- Multiplex: Composite Amplitude Response: : ≤ ± 0.1dB, from 30Hz to 53kHz. Input Connector: BNC female.
- Stereo: Audio Frequency Response: ±015 dB from 30 Hz to 15 KHz. Input Connector: XLR female
- AES /EBU: Amplitude response: ≤ ± 0.1dB, from 30Hz to 15kHz. Sampling Frequency: from 32 to 96 KHz with automatic selection, D/A Converter: 24 bit.
- AC Input Power: 230/400 VAC ±15%, 50/60 HZ(+/- 3HZ) single phase
- Operating temperature: -10°C to +50°C.
- Max Operating Altitude: 4000 mt.
- Protection against Lightning, Dust and Corrosion
- Mounting: 2 unit cabinet
- Size: 88mm. (H) x 484mm. (W) x 478mm. (D)
- Weight: ~ 11 Kg.
- Options: WEB TCP/IP-SNMP Remote Control, AES/EBU Input, Dynamic RDS coder, OIRT and JAPAN Bands
AXON EXCITER/TRANSMITTER
30W TO 1200W
- Frequency Range: 87.5 ÷ 108.00 MHz, Programmable in 10 KHz steps
- On request 66 ÷ 74 MHz (OIRT), 76 ÷ 90 MHz (JPN) Bands.
- Frequency Stability: better than ±150Hz from -10 to +50°C
- Max deviation: +/-150kHz.
- Frequency Control: Synthesizer µprocessor control.
- Power Output: 30W, 50W, 100W, 150W, 300W, 600W, 1200W. Adjustable from 0W to maximum power.
- Output Impedance: 50 ohm.
- Display: forward/reflection power and modulation indicator
- Type of Modulation: Direct frequency modulation of carrier frequency, F3E Stereo with Subcarrier and Mono .
- Lock in Time: Typ. 4 second.
- Off Lock Attenuation: ≥ -80 dBc.
- Modulation Capability: ±150 KHz.
- Modulation Mode: Mono, Stereo, Multiplex, SCA, RDS, Aux.
- Pre-emphasis: Flat(0)/50/75 µs selectable from front panel.
- Asynchronous AM S/N Ratio: -60 dB below reference carrier with 100% AM modulation @ 400 Hz, without FM modulation.
- Synchronous AM S/N Ratio: -60 dB below reference carrier with 100% AM modulation@ 400 Hz with FM modulation ±75 KHz @ 400 Hz.
- RF Harmonics: Exceeds ETSI/EBU/CCIR/FCC requirements. better than 84 dbc
- RF Spurious: Exceeds ETSI/EBU/CCIR/FCC requirements. better than 84 dbc
- Output Connectors: 30W to 600W N type connector, 1200W DIN 7/16 type connector
- Output power on/off and adjustable from front panel and remotely.
- Overall Efficiency up to 80%.
- Monitor RF: -60 dBc, BNC connector
- VSWR: 1.5:1 Maximum with automatic fold-back at higher VSWR
- MONAURAL OPERATION
- Audio Input Impedance: 600 ohm balanced, 15 Kohms unbalanced.
- Audio Input Level: -6 to +12 dBm. (Other range on request)
- Input Connector: XLR female.
- Audio Frequency Response: ±0.15 dB, 30 Hz to 15 KHz.
- Total Harmonic Distortion + Noise: 0.03% @ 400 Hz
- Intermodulation Distortion: 0.03%, 1 KHz/1.3 KHz, 1:1 ratio
- Transient Intermodulation Distortion: 0.03%, 2.96KHz square wave and 14 KHz sine wave.
- FM S/N Ratio: -89 dB RMS detector, -85 dB below ±75 KHz deviation, 50 µs de-emphasis, weighted.
- MULTIPLEX OPERATION
- Composite Input Impedance: 5 Kohm unbalanced.
- Composite Input Level: 3.5Vp-p for ±75KHz deviation.
- Input Connector: BNC female.
- Composite Amplitude Response: : ≤ ± 0.1dB, from 30Hz to 53kHz
- Total Harmonic Distortion + Noise: 0.03% @ 400 Hz
- Intermodulation Distortion: 0.03%, 1 KHz/1.3 KHz, 1:1 ratio
- Transient Intermodulation Distortion: 0.03%, 2.96 KHz square wave and 14 KHz sine wave.
- FM S/N Ratio: -89 dB RMS detector, -85 dB below ±75 KHz deviation, 50 µs de-emphasis, weighted.
STEREO OPERATION
- Audio Input Impedance: 600 ohm balanced, 15 Kohm unbalanced.
- Audio Input Level: -12 to +12 dBm.
- Input Connector: XLR female.
- Audio Frequency Response: ±015 dB from 30 Hz to 15 KHz.
- Total Harmonic Distortion + Noise: 0,03% @ 400 Hz
- Intermodulation Distortion: 0,02%, 60Hz /7kHz 4:1 ratio +4dBu
- Transient Intermodulation Distortion: 0.03%, 2.96 KHz square wave and 14 KHz sine wave.
- FM S/N Ratio: -85 dB RMS detector, -82 dB below ±75 KHz deviation, 50 µs de-emphasis, weighted.
- Stereo Separation: 30÷80 Hz ≥ -53 dB, 80Hz÷15 KHz ≥ -65 dB (Typ. 70 dB).
- Crosstalk attenuation: Main to Sub -55 dB 30 Hz to 15 KHz
- 38 KHz Suppression: ≥ -70 dB (typ. -85 dB).
- Pilot Frequency: 19 KHz ± 1 Hz
- Phase Pilot: ± 2° adjustable
- Output Pilot: 1 Vpp., BNC female
- Audio Filter Attenuation: ≥ -55 dB @ 19 KHz, > -45 dB 20 KHz to 100 KHz.
- Modes: Stereo, Mono L+R, Mono L, Mono R.
AES/EBU OPERATION
- Input Level: -10dBfs to 0dBfs
- Input Connector: XLR female, optical TOS-LINK.
- Input Impedance: 110 ohm.
- Data Format: S/PDF,AES/EBU, IEC958, EIAJCP340/1201.
- D/A Converter: 24 bit.
- Sampling Frequency: from 32 to 96 KHz with automatic selection
- Stereo separation (crosstalk): ≥50dB,100Hz to 5kHz
- Amplitude response: ≤ ± 0.1dB, from 30Hz to 15kHz
- FM S/N Ratio: -85 dB below ±75 KHz deviation, 50 µs de-emphasis, weighted.
SCA, RDS, AUX OPERATION
- Input Connector: BNC female
- Input Impedance: 3 Kohm.
- Input Level: -3 to +6 dBm.
- Frequency Response: ±0.2 dB, 40 KHz to100 KHz.
- Input Connector: BNC female. Most SCA, RDS, AUX, performance parameters are determined primarily by the generator used.
AUXILIARY CONNECTIONS
- USB: connector Type B female front panel.
- N°2 RS485: Serial Interface connector RJ45 back panel.
- Telemetry Interface: connector DB25F back panel.
- External Clock: connector SMA female (optional).
OPTIONS
- External clock: for PLL synchronization purpose 1-2-2.5-5-10 MHz external reference oscillator with self selection of the incoming frequency.
- DOUBLE EXCITER WITH AUTOMATIC CHANGEOVER SYSTEM
- SNMP TELEMETRY INTERFACE
- GSM AND PSTN TELEMETRY
- TCP/IP TELEMETRY INTERFACE
- SINCH-MODULE FOR SFN APPLICATION
- OIRT & JPN VERSION
- DIGITAL AUDIO INPUTS
- LPFM CODE STATION:FCC IDENTIFICATION CODE
- RDS CODER : EASY PROGRAMMABLE BY PC
- SCA Encoder
- Digital Composite 192kHz Input
