Sonifex CM-AESX3 Single 3 Way AES/EBU Passive Splitter With XLR Connectors
CM-AESX3 Single 3 Way AES/EBU Passive Splitter XLR Connectors
The CM-AESX3 is a passive “one-to-three” splitter housed in a small but robust aluminium box. It is designed to split a single AES3 digital audio source to up to three destinations, using Neutrik XLR connectors.
The CM-AESX3 provides solutions to a range of digital signal distribution problems, where correct termination is essential to maintain signal integrity. The input signal is split through high quality transformers, and 110Ω termination can be applied, if desired, to unconnected outputs.
The CM-AESX3 requires no power to operate, ensuring your audio remains connected from source to destination(s) without interruption from power failures.
Technical Specification For CM-AESX3 |
|
CM-AESX3: Cable Drive Capability |
|
| The table below sets out the minimum signal amplitude required to drive 100m (cumulative) of 110Ω twisted pair cable, based on the sample rate of the digital audio: | |
Sample Rate Minimum Signal Amplitude |
|
| 32kHz | *2Vpk-pk |
| 44.1kHz | *2Vpk-pk |
| 48kHz | *2Vpk-pk |
| 88.2kHz | 5Vpk-pk |
| 96kHz | 5Vpk-pk |
| * Minimum of 2Vpk-pk is defined by the AES3 format specification. | |
| The table below sets out the minimum signal amplitude required to drive 30m (cumulative) of 110Ω twisted pair cable, based on the sample rate of the digital audio: | |
Sample Rate Minimum Signal Amplitude |
|
| 176.4kHz | 3Vpk-pk |
| 192kHz | 3Vpk-pk |
Equipment Type |
|
| CM-AESX3 | Single 3 way AES/EBU passive splitter with XLR connectors. |
Physical Specification |
|
| Dimensions: | 7.7cm (W) x 8.3cm (D) x 4.2cm (H) 3.0” (W) x 3.3” (D) x 1.7” (H) |
| Weight: | Nett: 0.22kg Gross: 0.33kg Nett: 0.49lbs Gross: 0.73lbs |