JK Audio ComPack Universal Telecom Interface

593 USD ~~612 USD~~

JK Audio

Universal Telephone Audio Interface

Model/Product no.: JK-COMP

Stock status: Please ask for estimated delivery time

Piece

JK Audio - ComPack

Universal Telephone Audio Interface

Remotely Anywhere.

Pick up this new handheld road tool to get audio in and out of analog phone lines, PBX systems, even cell phones. Perfect for Remote Broadcasts, IFB feeds, or interviews over any phone connection.

Features
HD Voice Compatible (Wide-Band Speech)
Works with Analog and Digital PBX or VoIP Phones
4-conductor 3.5mm Headset Interface
Headphone, Mic, and Line Input Level Controls
XLR Mic Input (Mic/Line Switch)
XLR Line Output / Com Link
3.5mm Stereo Line Input
1/4" Stereo Headphone Jack
Transmit Clip LED
Battery Test LED
DTMF Keypad and Lockout Switch
Handset Selector Switch (Electret, Carbon, Dynamic)
>20 Hours on one 9V Alkaline Battery
Made in America
Approved for Sale in Europe and Australia

Wireless Phones and Notebooks

Simply plug ComPack into the 3.5 mm headset jack of your wireless phone or notebook computer. Your cell phone will recognize ComPack as a headset which will disable the internal mic and speaker.

PBX Systems

Unplug the handset from any analog or digital PBX phone and plug the coily cord into ComPack. You can now send and receive audio through the PBX telephone set.

Analog Phones

Plug ComPack into an RJ-11 jack, go off-hook and dial, or answer an incoming call.

Add a Phone Line to the Party Line

ComPack also functions as a simple telecom interface for your beltpack intercom system. This no-frills feature allows you to connect the 3 pin male XLR to your wet party line. This provides a full duplex, always-on connection to any telephone network.

Specifications
Mic In	Female XLR
Impedance	1k ohms
Level	15 mV RMS (-34 dBu nom)
Mic/Line Pad Switch	+6 dBu max
Line Input	1/8" (3.5mm) Stereo
Impedance	20k ohms
Level	250 mV RMS (-10 dBu nom)
Mix Out	Male XLR
Impedance	600 ohms
Level	45 mV RMS (-25 dBu nom)
Com Link	Male XLR
Bi-Directional Unbalanced
Headphone	1/4" Stereo
Impedance	8 ohms
Level	1/2 watt
Misc
Phone Line Connector	RJ11C
Handset Connector	RJ22
Ringer	0.9B REN
Isolation	1500 VAC
Keypad	DTMF
Power	9 volt battery AC power supply 120-240 VAC (included)
Size	8" x 3" x 2.2" (20.3 x 7.6 x 5.6 cm)
Weight	1.5 lbs (680 g)

*HD Voice: While standard phone calls have a narrow bandwidth of 300 Hz to 3.4 kHz, HD Voice calls offer 50 Hz to 7 kHz bandwidth. The additional 1.5 octaves on the low end gives voice a more natural sound, while the additional upper octave dramatically improves speech clarity and intelligibility.

*Wireless HD Calls: To take advantage of this extended bandwidth, both phones on the call must support HD Voice, and both phones must be on the same carrier, in coverage areas that support HD Voice.

Title	Type	Size	Download
JK-Audio-ComPack-Datasheet.pdf	PDF	325.06KB	Download

Product's tags

There are no tags registered.

Mine tags