Sale
Glensound MPI005HD-MKII/1 Touchscr rackmount 7 kHz Glensound HD Voice Broadcasters 1 Mobile Phone

Glensound MPI005HD-MKII/1 Touchscr rackmount 7 kHz Glensound HD Voice Broadcasters 1 Mobile Phone

Touchscreen rackmount 7 kHz Glensound HD Voice Broadcasters' Mobile Phone with 1 x phone module

Model/Product no.: GS-MPI005HD MKII/1
Stock status: Please ask for estimated delivery time
Piece

Glensound GS-MPI005HD MKII 

Next Generation HD Voice Broadcaster's Phone

 

Glensound invented the Broadcaster’s mobile phone and our GS-MPI005 and GS- MPI005HD mobile phone racks have been hugely popular with broadcasters and can be found in daily use in outside broadcast trucks and studios around the World.

 

The completely updated GS-MPI005HD MKII is a mains powered 1RU subrack that can be fitted with up to two mobile phones featuring professional audio interfaces for connecting broadcast audio equipment to cell phone networks.

 

On the surface the new Glensound GS-MPI005HD MKII looks different as it has touch screen colour displays for each phone module fitted. A traditional telephone handset interface is also now provided to allow an operator to communicate off air before handing the call over to broadcast. The handset interface can also dial and answer calls.

 

No new modern piece of audio broadcast equipment is complete without an AoIP solution so the new GS-MPI005HD MKII has an optional Dante®/ AES67 card.

 

Of course the crystal clear sound and audio inputs & outputs that are interference free of cell phone noise that made the original units so popular also feature in this new design.

 

Features

  • Next Generation Rackmount HD Voice Broadcasters' Mobile Phone
    Provides extended new features compared to previous devices, but retains proven reliable call quality
  • Touch Screen Colour Display
    Allows multiple new options for setup, control & easy day to day use
  • Handset interface for off air call screening
    Allows a user to have an off air conversation/ dial or answer a call via the handset before transferring the call to the XLR/ Dante® circuits
  • GSM/ 3G (UMTS)/ 4G (LTE) Calls
    Two different versions available, US and EU to allow users to select the range of frequencies that work best for them
  • Optional network audio interface
    Dante® (AES67 compliant) interface for both off air and broadcast calls
  • GPIO, programmable GPIO for interfacing to other studio equipment
  • 50 number phonebook
  • 1RU Mains Powered Rack
    Wide range internal switch mode power supply
  • New Web interface remote control & improved system responsiveness.

 

NEW Features for MKII

  • All New MKII Broadcaster’s Mobile Phone
    The all new GS-MPI005HD MKII is a completely new modern design with extra features and functionality to enhance and improve the much loved original GS-MPI005HD. It however keeps the inherent crystal clear mobile phone audio and interference free circuits that made the original so popular with so many broadcasters.
  • Touch Screen Display   
    A front panel touchscreen display is provided for each mobile phone fitted. Each touchscreen allows the operator to make and receive calls, transfer the call between the broadcast circuits and telephone handset and a detailed setup menu is also accessible via the touchscreen.
  • Telephone Handset Interface
    For flexibility an optional traditional telephone handset can be connected to the GS-MPI005HD MKII. For simplicity one handset controls one phone. The audio to/ from the handset is separate to the audio to/ from the broadcast outputs and an operator can make or answer a call using the handset and then transfer (divert) this call to the broadcast circuits. If a call is currently being routed to the broadcast circuits then it can be transferred to the handset
  • Optional Dante®/ AES67 Network Audio Interface
    As many broadcaster’s have already adopted Dante® (and some AES67) as their network audio infrastructure of choice it made sense to future proof the GS-MPI005HD MKII by allowing an optional Dante®/ AES67 module to be fitted to allow full AoIP connectivity of both the broadcast and off air ‘handset’ audio circuits.
  • Assignable GPIO 
    Each phone has 5 loops for connection to external equipment. These can be set as either inputs or outputs. The inputs can be used for things such as Answering/ Ending an incoming call, Turning the sounder off, Diverting the call between broadcast and handset and the outputs can be set to indicate an Incoming Call or to show when a call is in progress.
  • Diversity Antennas 
    The GS-MPI005HD MKII is fitted with twin diversity antennas which provide improved signal reception and range when operating on 4G LTE networks.

 

Other Features

  • One or Two Phones in a Subrack
    The GS-MPI005HD MKII can be purchased with as a single phone unit or twin phone unit. If purchased as a single then it can be updated at a later stage by Glensound to become a two phone unit.
  • Unlocked Mobile Phone 
    The GS-MPI005HD MKII is an unlocked mobile phone and can be used on any network with any SIM card.
  • Front Panel SIM Card Slots
    For ease of change, SIM card slots for each phone are located on the front panel, these like their predecessors, are set such, that when fitted the SIM card is flush to the front panel and must be pushed in from this position to change it. This positioning makes it impossible to knock the SIM card by accident.
  • Audio Level Controls & Meters 
    The touchscreen display menu system allows the line level audio input & output signals to be adjusted to match the connected equipment. When in this mode simple audio meters are also provided to indicate the current input/ output levels.
  • Audio Compressors 
    Being a digital audio circuit it is very important not to present the cell phone network with a signal greater than full scale, therefore a compressor limiter circuit is fitted to ensure that you have great sounding outgoing audio circuits. The same much respected compressor characteristics used on previous versions of the GS-MPI005 are used on this new MKII version.
  • Headphone Output 
    For easy monitoring of your audio signals a 6.35mm stereo headphone socket is fitted to the front panel for each phone. In the menu system it is possible to setup a mix of any of the unit's and phone’s audio sources to appear in the headphone output mix.
  • SMA Antenna Connectors 
    The SMA sized antenna connector used on the original GS-MPI005 have proved reliable and convenient in allowing customers to change the antennas to a type that suits their installation. Therefore the new MKII unit continues to use this connector, however as there are now diversity antenna outputs there are 2 SMA connectors for each phone module.
  • Balanced Line Level Audio Inputs/ Outputs 
    Each phone has its own XLR balanced audio inputs and outputs. These are the ‘Broadcast’ audio circuits and are completely free of any mobile phone interference noise.
  • Mains Powered 19" 1RU Subrack
    A wide input range (100 - 240 VAC) switch mode power supply is fitted terminated in an IEC plug with an internal fuse for Worlwide compatibility. The GS-MPI005HD MKII is a 19" wide 1RU high subrack.

 

Order Codes

There are 4 different versions for the GS-MPI005HD MKII and each one has its own order code

ORDER CODE: GS-MPI005HD/1 MKII EU = Rack with 1 x 900 MHz phone module fitted 

ORDER CODE: GS-MPI005HD/2 MKII EU = Rack with 2 x 900 MHz phone modules fitted 

ORDER CODE: GS-MPI005HD/1 MKII US = Rack with 1 x 850 MHz phone module fitted 

ORDER CODE: GS-MPI005HD/2 MKII US = Rack with 2 x 850 MHz phone modules fitted 
 

The optional Dante® module must be ordered separately (and can be retro fitted if required)

ORDER CODE: GS-MPI005HD MKII NC = Dante®/AES67 module (only 1 x module required per subrack)
 

The optional telephone handset must be ordered separately

ORDER CODE: GS-MPI005HD MKII TH = Telephone handset (1 required for each phone module fitted) 

 

Dante/AES67 Card

As standard each mobile phone that is fitted in the Glensound GS-MPI005HD MKII has a balanced analogue audio input and output. An optional network audio interface card is available that provides 4 channels of Dante® (AES67 compliant) audio. 

2 of the 4 network audio output circuits are in parallel with the 2 analogue outputs.
2 of the 4 network audio output circuits are in parallel with the 2 audio circuits being sent to the 2 handsets.

2 of the 4 network audio inputs are mixed internally with their own associated analogue input.
2 of the 4 network audio inputs are mixed internally with their own associated handset input.

The network audio card has a copper RJ45 interface.

If the network audio card option is ordered at the same time as the Glensound GS-MPI005HD MKII then it will be fitted by our engineers, but it is possible to order it retrospectively and fit it yourself.

 

 

Specs

GS-MPI005HD MKII EU FREQUENCY

LTE (4G): Bands 20, 8, 3, 7 & 1 (800, 900, 1800, 2600 & 2100 MHz)
UMTS (3G): Bands 8, 3 & 1 (900, 1800 & 2100 MHz)
GSM (2G): Dual Band (900 & 1800 MHz)

GS-MPI005HD MKII US FREQUENCY

LTE (4G): Bands 17, 5, 4 & 2 (700, 850, 1700 & 1900 MHz)
UMTS (3G): Bands 5, 4 & 2 (850, 1700 & 1900 MHz)
GSM (2G): Quad Band (850, 900, 1800 & 1900 MHz)

VOICE SUPPORT

HR, FR, EFR, AMR narrowband & AMR wideband (HD Voice)
LTE (Via VoLTE (Voice over LTE)) and CSFB (circuit-switched fallback)

Product's tags

There are no tags registered.

Mine tags